18
MEANING OF ALARM LIGHTS
DISPLAYED LIGHT
POSSIBLE CAUSE
SOLUTION
Insufficient water in the tank.
Fill the tank with water and insert it correctly,
pushing it as far as it will go until it clicks into
place.
The tank is not correctly in place.
Insert the tank correctly and press as far as it
will go.
The grounds container (A13) is full. Empty the grounds container and drip tray,
clean and replace. Important: when remo-
ving the drip tray, the grounds container must
always be emptied, even if it contains few
grounds. If this is not done, when you make
the next coffees, the grounds container may fill
up more than expected and clog the machine.
After cleaning, the grounds contai-
ner has not been replaced.
Remove the drip tray and insert the grounds
container.
The grinding is too fine and the
coffee is delivered too slowly or
not at all.
Repeat coffee delivery and turn the grinding
adjustment dial (fig. 10) one click clockwise to-
wards “7” while the coffee mill is in operation.
If after making at least 2 coffees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment dial another
click until delivery is correct (see the section:
“Adjusting the coffee mill on page 12). If the
problem persists, turn the steam dial to the I
position and let some water run from the cap-
puccino maker.
