background image

6

fig. 12

fig. 13

fig. 14

fig. 15

fig. 16

Coffee Maker

7. To remove the used coffee lock the filter with the built-in lever and let

the coffee fall out by knocking the over turned filter holder (fig. 12).

8. To switch off the coffee machine, press the ON/OFF switch (fig 3) 

How to prepare coffee using the filter holder for
pods (depending upon model)

1. Preheat the machine as described in the ‘Preheating the Coffee

Machine’ section, attaching the pod filter holder to the unit.This
procedure ensures that the coffee is delivered at a hotter tem-
perature and that the seal of the holder is more effective.

2. Remove the pod filter holder and tip any excess water away. Press

button on the holder and insert the pod into the filter (fig 13).

Note:

Use pods which conform to the ESE standard: this will be

indicated on the packaging by the symbol as in fig. 14.
The ESE standard is a system accepted by the leading coffee pod
manufacturers, and allows espresso coffee to be prepared simply
and without any mess.

3. Attach the pod filter onto the machine, moving from left to

right (fig 5).

4. Proceed as in points 4, 5 and 6 of the previous section (how to

prepare espresso coffee using the filter holder for ground coffee).

5. To remove the pod, press the button on the filter holder and

simply lift the pod out

6. To switch off the coffee machine, press the ON/OFF switch (fig 3).

Note: to ensure a tight fit and avoid water leaking from
the rim of the filter holder, you are recommended to
grease the bottom of the lateral tabs from time to time
with butter or oil (as shown in fig. 15).

IMPORTANT: If ground coffee has been used with the
machine before using the filter holder for pods, it may be nec-
essary to clean any remaining ground coffee from the boiler
outlet. (fig. 16). This cleaning operation is necessary in order
to avoid water leakages.

Note:

If you use the “Illycaffè” coffee pods supplied in your

machine, insert the coffee pod ensuring the name “Illy” is facing
down and the long side of the pod goes from left to right.

EC610/615 UK  16-05-2002  16:26  Pagina 6

Содержание EC-610















Отзывы: