4
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
Coffee Maker
How to prepare espresso coffee
Filling the water tank
Remove the water tank by pulling it sideways, at the same time lift-
ing the tubes (fig. 1).
Rinse the water tank and fill with fresh water up to the upper
mark (fig. 2). Replace the water tank in its housing, ensuring that
the tubes are immersed in the water.
An easier way to fill the water tank is to pull it out just enough so
water can be poured in directly from a jug..
Remember to clean the water tank regularly.
Preheating the coffee machine
To ensure your espresso coffee is dispensed at the right tempera-
ture it is essential that the coffee unit is preheated.
1. Press the ON/OFF switch.The ON/OFF light will light up (fig.
3).
2. Attach the empty filter holder (without coffee) to the machine
by positioning it under the boiler outlet with the handle
towards the left (fig. 4). Push upwards and at the same time
turn the handle as far right as possible. It does not matter if the
handle is not centrally aligned with the machine, as long as the
filter holder is firmly attached to the appliance.
3. Position a cup under the filter holder. Use the same cup that
the coffee will be served in, so that it may be preheated.
4. Wait until the “OK” light comes on (fig 5) and
press the deliv-
ery switch
(fig 6)
.
Allow water to flow until the “OK” light goes
out, then stop the flow of water by pressing the delivery switch
again (fig. 6).
5. Empty the cup, wait until the “OK” pilot light comes on again
and repeat the whole operation one more time.
(It is normal for a small and harmless puff of steam to be released
when removing the filter holder).
EC610/615 UK 16-05-2002 16:26 Pagina 4
