21
Anchorage
clip
Anchorage
clip
I
I
V
V
■
Remove the burner as shown in figure 2.17.
■
Using a 7 mm box spanner, unscrew the injector
(indicated by the arrow in fig. 2.18) and replace it by the
proper one according to the kind of gas.
■
Then replace the burner and other components repeating
the above steps in reverse order.
IMPORTANT:
Pay special attention to replace correctly
the safety valve probe "
V
" and the ignition electrode "
I
"
as per figures 2.19 and 2.20. Check the correct operation
of the safety valve and the ignition electrode.
Fig. 2.17
Fig. 2.19
Fig. 2.20
Fig. 2.18
