19
USE AND CARE
CAUTION:
■
This appliance must be used only for the task it has explicitly been designed for, that is for
domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate
and therefore dangerous.
■
Do NOT place combustible materials or products on this appliance at any time.
■
Do NOT use or store flammable materials in the appliance storage compartment or near
this appliance.
■
WARNING: Accessible parts will become
hot when in use. To avoid burns and scalds,
young children should be kept away.
■
Do NOT spray aerosols in the vicinity of this
appliance while it is in use.
■
Do NOT modify this appliance.
USING THE OVEN FOR THE FIRST TIME
Operate as follows:
■
Fit the side runner frames “
G
” (interposing the
catalytic panels “
A
”) into the holes on the side
walls inside the oven (fig. 16).
■
If available, slide in the grease filter
on the back of the oven as in fig. 19.
The grease filter is not supplied with this
appliance but can be purchased separately.
■
Slide in, on the guides, the shelf and the tray
(fig. 17).
The rack must be fitted so that the safety
notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at
the back.
The oven tray must be correctly placed on
its wire shelf support (fig. 18) then inserted
into the guides (fig. 17). The oven tray shelf
support must be fitted so that the safety notch,
which stops it sliding out, faces the inside of
the oven.
■
To eliminate traces of grease in manufacture
it is necessary to preheat the oven at the
maximum temperature:
•
for 60 minutes in the position, for 30
minutes in the position and for another
15 minutes in the position.
■
Slide off the wire racks and the catalytic liners
to the oven wall as in figs. 16.
■
Let the oven cool down, switch off the
electrical supply, then clean the inside of the
oven with a cloth soaked in water and neutral
detergent and dry thoroughly.
Figure 18
G
A
Figure 16
Figure 17
Guard rail
Stop notch
Stop notch
