SINGLE SPLIT
8
English 11/2002
OPERATING MODES
OPERATING MODES
1. Selecting the operating mode
Each time that the MODE button is pressed the oper-
ating mode is changed, in the following sequence:
FULL AUTO COOLING DRY FAN ONLY
HEATING
2. FAN mode
Each time that the FAN button is pressed, the speed is
changed, in the following sequence:
AUTO LOW
MEDIUM
HIGH
3. Setting the temperature
Press once to increase the set temperature
by 1°C.
Press once to decrease the set temperature
by 1°C.
Range of temperature settings available:
HEATING
16°C ~ 30°C
COOLING
16°C ~ 30°C
DEHUMIDIFICATION
16°C ~ 30°C
FAN ONLY
no setting allowed
4. Starting the appliance
Press the button
.
When the unit is switched on it will start
operating in the mode selected prior to
being switched off.
5. Adjusting the air flow
Pressing the “SWING” button starts moving the air
flow louvers star t automatically; pressing the
“SWING” button again stops the louvers.
Do not move the vertical air flow louvers
manually, as this may cause poor operation. If
this happens, first turn the appliance off, then
disconnect and reconnect it to the power
supply.
Adjusting the horizontal air flow (manual)
Turn the louver sliders for the horizontal adjustment of
the air outlet to change the angle of the air flow, as shown
(the unit illustrated may be different from the air-condi-
tioner you have purchased).
This operation must be carried out by specialist
technicians.
1
2
5
4
3
3
U
I
A
Sliders for adjusting the horizontal air flow louvers.
