INSTALLATION OF THE INDOOR UNIT
SINGLE SPLIT
15
English 11/2002
A
I
1
2
3
4
1. INSTALLATION OF THE FASTENING PLATE
Select the position for installing the fastening plate,
according to of the location of the indoor unit and the
layout of the pipes.
Adjust the level of the fastening plate, using a straight-
edge or a plumb line.
Make 32mm deep holes in the wall to mount the plate.
Insert the plastic plugs in the holes, then secure the fas-
tening plate using the self-threading screws supplied
with the unit.
Check that the fastening plate is securely fitted so as to
support a 60kg adult.
Your fastening plate may differ from the one
described above, yet the installation proce-
dure is the same.
2. MAKE A HOLE FOR THE PIPES
Choose the location of the hole for the pipes, accord-
ing to the position of the fastening plate.
Make a hole in the wall. The hole must slope down-
wards towards the outside.
Place a sleeve through the hole in the wall to protect
the wall and keep it clean.
3. INSTALLATION OF THE PIPES ON THE
INDOOR UNIT
Place the pipes (for liquid and gas) through the hole in
the wall from the outside, or alternatively from the
inside after having completed the installation of the
pipes and the connection of the cables on the indoor
unit, for connection to the outdoor unit.
Decide whether to remove the plastic segment,
according to the direction of the pipes.
When the pipe is fastened along the direc-
tion 1, 2 or 4, remove the corresponding plas-
tic segment from the base of the indoor unit.
After having connected the pipes according to the
instructions, install the drain hose.Then install the pow-
er supply cables. After having completed the connec-
tions, wrap the pipes, cables and drain hose in a layer of
thermal insulation.
Line the joints of the pipe with thermal insu-
lation and cover them with vinyl tape.
Sleeve with hole in the wall
(rigid polythene pipe sup-
plied by the user)
5mm (downwards
slope)
INSIDE
OUTSIDE
Direction of pipe insertion
Thermal insulation
Vinyl tape covering
Remove the plastic
segment along the
raceway
Raceway
Plastic
segment
