SINGLE SPLIT
17
English 11/2002
3. CONNECTING THE CABLE
Indoor unit
Connect the power cable to the indoor unit by connect-
ing the wires to the terminals on the control panel indi-
vidually, according to the connection to the outdoor unit.
To make the connection to the indoor unit ter-
minal, remove the console.
Outdoor unit
Remove the access door from the unit by loosening
the screw. Connect the wires to the terminal on the
control panel with a terminal screw.
Place the access door back in position and tighten the
screw.
Use an approved switch between the power
supply source and the unit. An isolating
device must be fitted to correctly disconnect
all the power supply lines.
Use a separate power supply circuit specifi-
cally for the air-conditioner. For details on
the wiring method, refer to the circuit dia-
gram inside the access door.
Check that the thickness of the cable com-
plies with the specifications of the power
supply.
Check the wires and make sure that they are
all securely fastened following the connec-
tion of the cable.
Make sure an ear th leakage switch is
installed in wet or damp areas.
The connection cable between the outdoor
and indoor unit must be suitable for outdoor
use.
The plug must remain accessible following
the installation of the appliance, so that the
appliance can be unplugged if required. If this
is not possible, connect the appliance to a
two-pole switch, with a distance between the
contacts of at least 3mm, which must be
installed in an accessible position.
Terminal (inside)
Front panel
Console
Frame
Indoor unit
Outdoor unit
Access door
fastener (inside)
