5
E L E C T R I C A L R E Q U I R E M E N T S ( U K O N L Y )
Before using this appliance ensure that the voltage indicated on the product corresponds
with the main voltage in your home, if you are in any doubt about your supply contact
your local electricity company.
The flexible mains lead is supplied connected to a
B.S. 1363 fused plug having a fuse of 13 amp
capacity.Should this plug not fit the socket outlets in
your home, it should be cut off and replaced with a
suitable plug, following the procedure outlined below.
Note:
Such a plug cannot be used for any other
appliance and should therefore be properly disposed
of, (having removed the fuse) and not left where
children might find it and plug it into a supply socket -
with the obvious consequent danger.
N.B.
We recommend the use of good quality plugs
and wall sockets that can be switched off when the
machine is not in use.
IMPORTANT:
the wires in the mains lead fitted to
this appliance are coloured in accordance with the
following code:
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol or
coloured green or green and yellow.
The wire which is coloured blue must be connected
to the terminal which is marked with the letter
N
or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter
L
or coloured red.
When wiring the plug, ensure that all strands of wire
are securely retained in each terminal. Do not forget
to tighten the mains lead clamp on the plug. If your
electricity supply point has only two pin socket
outlets, or if you are in doubt, consult a qualified
electrician.
Should the mains lead ever require replacement, it is
essential that this operation be carried out by a
qualified electrician and should only be replaced
with a flexible cord of the same size.
If the plug is a moulded-on type the fuse cover must be
refitted. If the fuse cover is lost, the plug must not be used
until a replacement cover is obtained. The colour of the
correct replacement fuse cover is that of the coloured
insert in the base of the fuse recess or elsewhere on the
plug. Always state this colour when ordering a
replacement fuse cover.
Only 13amp replacement fuses which are ASTA
approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN 55014
regarding the suppression of radio interference.
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
WARNING - THIS APPLIANCE MUST BE EARTHED
Green and Yellow to
Earth
Blue to
Neutral
13 amp
Fuse
Brown to
Live
Cord Clamp
GB-326IDL 17-06-2004 8:40 Pagina 5
