6
I N S T R U C T I O N S F O R U S E
1. Place the slices of bread or sandwich in the racks (
A
), making sure they touch the bottom of the rack.
2. Plug into a suitable mains supply socket.
3. Place the racks in the appliance.
4. Turn the browning control dial (
D
) to required setting.
5. Press down control lever (
C
) until it locks.
6. If the toast is not brown enough, increase the toasting time. If, on the other hand, it is too dark, decrease the
time.
7. The toasting may be stopped at any time by pressing the Stop/cancel button (
G
).
In order to eliminate the “new” smell at the first use, operate the appliance without any food inside for at
least 5 minutes. Aerate the room during this operation.
Note: If the appliance is not connected to the electrical outlet, the lever will not go all the way down.
Using the Defrost button
1. Place the slices of bread or sandwich in the racks (
A
), making sure they touch the bottom of the rack.
2. Turn the browning control dial (
D
) to required setting.
3. Press down control lever (
C
) until it locks
4. Press the “Defrost Button” (
F
). The “Defrost Light” (
F
) will remain on while the defrost function is in use, and
toasting time will be automatically extended
Using the Stop/Cancel Button
Should you want to interrupt the toasting process, simply press the stop/cancel button (
G
) at any time.
Warning:
Do not force control lever (
C
); always use the stop/cancel button (
G
).
Using the Reheat Button:
Press down control lever (
C
) and press the reheat button (
E
). The reheat light (
E
) will remain on whilst the reheat
function is in use. Please note that this is a fixed reheat time which cannot be adjusted by the browning control.
Crumb tray
The crumb tray (
H
) should be emptied regularly as a build-up of crumbs could be a potential fire hazard. After
toasting, allow the toaster to cool down thoroughly, then slide out the crumb tray (
H
) and empty.
Note:
The racks (
A
) allow you to use a variety of different bread widths. However, you should not force items into the
slots which are clearly too large. If an item does become jammed, switch toaster off at the mains immediately.
Once cooled, turn toaster upside down and gently shake to remove the lodged item. Do not insert sharp objects
such as knives, as this may damage the heating element.
GB-326IDL 17-06-2004 8:40 Pagina 6
