Copyright 2014, Delmhorst Instrument Co.
Page 5 of 17
TO POWER THE METER ON:
To turn the meter on, press and hold the
SELECT
button for approx. 2 seconds.
The first screen will temporarily display the meter name and the software revision level. Refer to
this revision level whenever you call Customer Service.
The next screen is the
MAIN MENU
. Use the
keys to select the desired
function/mode and then press
SELECT
to activate the function.
Keypad Layout
METER USE
TO TAKE WOOD READINGS:
1.
From the Main Menu
, use the
key to highlight
WOOD
. Then, use the
SELECT
key
to enter the
WOOD
screen.
2. The meter will display the
WOOD
screen, as shown below:
3. Push the contact pins into material to be tested. Any Delmhorst electrode may also be
used in
WOOD
mode by simply attaching it to the connector on top of the meter.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
