www.dellonda.co.uk
7
• Step 4 - Attaching the trampoline mat
Attaching the bounce mat
• With your frame fully assembled and standing on it’s feet, spread the bounce mat out inside
the frame and facing upwards (see markings and ensure the seam is facing the ground).
• As you start to attach the springs, be very careful, you will need at least one person to help
you, as the you start to put the mat under tension and add strings the risk of accident and
injury is increased.
• Lift the mat and start adding the springs beginning with 4 evenly spread as shown in the
illustration, this will keep your mat taught and will make it easier to attach the rest.
Description
Unit
6”
8”
10”
12”
Springs
Pcs
36
48
54
72
Spring Tool
Pcs
1
1
1
1
• Working from opposite sides in turn begin adding the springs, hook one end of the spring
into the next eyelet on the mat, attach the spring tool to the other end stretch and support the
spring as shown.
• Hook the open end of the spring into the next corresponding hole in the frame and release
the spring tool
carefully
.
• Warning! Be careful adding the springs these can cause injury and trap hazards.
• Step 5 - Adding the mat springs
Wear eye protection
