4
Assembly
• To assist connecting the regulator, carefully place the rubber hose into an insulated cup of boiling hot water. This allows the rubber hose to
expand and allow the regulator to be connected easily. After connecting the regulator, tighten the hose clip with a screwdriver.
•
1. Assemble the wheel assembly (M) to the bottom plate (N). Fix the wheel assembly (M) to the bottom plate (N) using 4pcs bolt M8x12 (
EE
) and
4pcs flange nut M8 (
FF
).
•
2. Insert the pins of the bottom plate (N) to the holes of lower support (L), press to secure the pins. Using 12pcs screw 3/16” (
DD
) to secure the
lower support (L) and bottom plate (N). Using 8pcs screw 3/16” (
DD
) to secure the lower support (L) and middle plate (J).
