Environment Protection and Waste Protection and Electrical Equipment
Regulations
(WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has
reached the end of it’s useful life, please dispose of it in an environmentally friendly way. Drain any
fluids (if applicable) into approved containers, in accordance with local waste regulations. Under
the Waste Batteries and Accumulators Regulations 2009, Jack Sealey would like to inform the
user that this product contains one or more batteries. It is our policy to continually improve
products and we reserve the right to alter data, specifications and parts without prior notice.
No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase
date, proof of which is required for any claim.
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284
757575 [email protected] www.dellonda.co.uk
Problem
Possible cause
Solution
Burners will not light using the
ignition system.
Gas cylinder empty.
Faulty regulator.
Obstructions in burner.
Obstructions in gas jet or gas
hose.
Wire is loose or disconnected on
electrode or ignition unit.
Electrode or wire is damaged or
faulty push button igniter.
The distance between the burner
and the electrode pin is too large
or too small
Replace with full cylinder.
Have regulator checked or
replace.
Cleans jets and gas hose.
Reconnect wire.
Change electrode wire or change
igniter. Check and ensure the
distance between
Low flame or flashback (flame
in burner tube, a hissing or
roaring noise may be heard).
Gas cylinder is too small.
Obstructions in burner.
Obstructions in gas jets or gas
hose.
Windy conditions.
Use larger cylinder.
Clean burner.
Clean jets and gas hose.
Use barbecue in a more sheltered
position.
Troubleshooting
