4 www.dellonda.co.uk
the barbecue and after a cylinder change. Test
the leakage on all the connections where gas
passes by.
• GAS
LEAK
CHECK
Put soapy water on all the
connections where the gas reaches. Open the
gas cylinder valve and regulator. If bubbles are
seen, tighten the connection. If bubbles are
still seen, close all valves, turn off the regulator
and contact Dellonda for help.
• Never use the plancha with a leak.
• The gas cylinder can only be changed by a
competent person.
• Use oven gloves and sturdy long handled
barbecue tools when cooking on the plancha.
•
Be prepared if an accident or fire should
occur. Know where your first aid kit and
fire extinguishers are and how to use them
correctly.
• Keep the gas supply hose away from any
heated surfaces.
• Ensure the appliance has completely cooled
before storing.
• Cylinders must be stored outdoors, upright
and out of reach of children. Protect cylinder
from high temperatures and replace the plastic
port cap.
• This gas plancha is designed for outside use
only.
• DO
NOT
use in high winds.
• DO
NOT
move the plancha during use.
• DO
NOT
operate if there is a gas leak.
• DO
NOT
attempt to disconnect any gas fitting
if your plancha is being used, including the gas
hose and regulator.
• DO
NOT
leave unattended, from being lit to
fully cooled.
• DO
NOT
use this plancha in a garage or any
enclosed area. Keep the surrounding area
clear, at least 1.0m from any combustible
materials and 0.5m from a brick wall.
• DO
NOT
attempt any unauthorised interference
of the main controls on this barbecue, i.e. gas
taps, injectors, valve etc.
• DO
NOT
attempt to use charcoal in this
plancha.
• DO
NOT
position on a surface that may be
damaged by hot fat or heat.
• DO
NOT
store petrol or other flammable
vapours or liquids in the vicinity of this
plancha.
Assembly
• WARNING!
Although we take every effort to
ensure that the assembly process is as easy
as possible, it is inherent with fabricated steel
parts that corners and edges can cause cuts if
improperly handled during assembly
procedures. Be careful while handling any
parts during assembly. It is strongly
recommended that you protect hands with a
pair of work gloves.
•
Attach the feet to the burner unit (fig.1).
•
Attach the plancha to the burner unit (fig.2.4).
Insert the drip tray (fig.2.3).
fig.1
fig.2
