dellonda baridi DH72, Руководство пользователя

Страница: 5 / 28

5
Important Information
Please read these instructions carefully and note any safe operational requirements, warnings &
cautions. Use the product correctly and with care for the purpose for which it is intended. Failure
to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these
instructions safe for future use.
Replacement fuse
rating:
13A
Refer to
instructions
Indoor use
only
• ELECTRICAL SAFETY
• WARNING! It is the user’s responsibility to check the following:
• Check all electrical equipment and appliances to ensure that they are safe before using. Inspect
power supply leads, plugs and all electrical connections for wear and damage. Dellonda recommend
that an (Residual Current Device) is used with all electrical products. You may obtain an RCD by
contacting your local domestic stockist. If the product is used in the course of business duties, it
must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested.
• Electrical safety information: It is important that the following information is read and understood.
• Ensure that the insulation on all cables and on the appliance is safe before connecting it to the
power supply
• Regularly inspect power supply cables and plugs for wear or damage and check all
connections to ensure that they are secure.
• Important: Ensure that the voltage rating on the appliance suits the power supply to be used and
that the plug is fitted with the correct fuse - see fuse rating in these instructions.
• DO NOT pull or carry the appliance by the power cable.
A) Connect the GREEN/YELLOW earth wire
to the earth terminal ‘E’.
B) Connect the BROWN live wire to the live
terminal ‘L’.
C) Connect the BLUE neutral wire to the
neutral terminal ‘N
• DO NOT pull the plug from the socket by the
cable.
• DO NOT use worn or damaged cables, plugs or
connectors.
• Ensure that any faulty item is repaired or
replaced immediately by a qualified electrician.
• This product is fitted with a BS1363/A 13 Amp
• 3 pin plug. If the cable or plug is damaged
during use, switch off the electricity supply
and remove from use.
• Ensure that repairs are carried out by a
qualified electrician.
• Replace a damaged plug with a BS1363/A 13
amp 3 pin plug.
• If in doubt contact a qualified electrician.
• Ensure that the cable outer sheath extends
inside the cable restraint and that the restraint
is tight.
• Dellonda recommend that repairs are carried
out by a qualified electrician.