Page 6
How To use
Power on/off
In power off state, press
Power on/off button
and hold it for about 3 seconds, release the button
when the led indicator flash blue indicating the headset is been powered on successfully.
In power on state, press
Power on/off button
and hold it for about 6 seconds, release the button
when the led indicator flash red indicating the headset is been powered off.
Pairing Two Bluetooth Helmet
H
eadset
To conduct full duplex intercom between two helmet Bluetooth headset, they need to pair with
each other for using at the first time, and the pair info will be saved for using next time (it pairs
each other automatically). Follow the instruction below:
①
Place two Bluetooth headsets in a visible area together (distance less than1 meter range), and
make sure there is no other Bluetooth headsets in pairing state around, and both of the Bluetooth
Helmet Intercom headsets are in power off state.
Press and
②
hold
Power on/off Button
of both Bluetooth Helmet Intercom headsets for about 8
seconds,when the led indicators of both headsets flash red and blue quickly and alternately, release
both buttons, at this moment, the two Bluetooth Helmet Intercom headsets are in pairing state.
Then short press either of pairing button, the pressed Bluetooth Helmet Intercom headset will
search another in pairing state one and try to pair with it.
Once paired success, both Bluetooth Helmet Intercom headsets indicators will
③
become flashing
blue slowly.
Pairing between DK10 Bluetooth
Helmet H
eadset and Mobile.
Place the
①
DK10 Bluetooth Helmet Intercom headset and the mobile phone in a visible area
within 1 meter range.
Make sure the Bluetooth Helmet Intercom headset is in power off
②
state.
Press and hold
③
Power on/off Button for about 8 seconds, release the button when the led
indicator flash red and blue quickly and alternately, then the Bluetooth Helmet Intercom headset is
in pairing state now.
