Dell XPS M1210, Руководство пользователя, Страница: 93 / 192

Troubleshooting
93
H ARD - DISK DRIVE READ FAILURE —
The hard drive may be defective. Shut down the computer, remove
the hard drive (see "Hard Drive" on page 116), and boot the computer from a CD. Then shut down the
computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive.
Run the Hard-Disk Drive tests in the Dell Diagnostics (see page 85).
I
NSERT BOOTABLE MEDIA
—
The operating system is trying to boot to a nonbootable CD. Insert a
bootable CD.
I NVALID CONFIGURATION INFORMATION - PLEASE RUN S YSTEM S ETUP P ROGRAM —
The system configuration
information does not match the hardware configuration. The message is most likely to occur after a
memory module is installed. Correct the appropriate options in the system setup program (see "Using
the System Setup Program" on page 171).
K EYBOARD CLOCK LINE FAILURE —
For external keyboards, check the cable connection. Run the Keyboard
Controller test in the Dell Diagnostics (see page 85).
K EYBOARD CONTROLLER FAILURE —
For external keyboards, check the cable connection. Restart the
computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard
Controller test in the Dell Diagnostics (see page 85).
K EYBOARD DATA LINE FAILURE —
For external keyboards, check the cable connection. Run the Keyboard
Controller test in the Dell Diagnostics (see page 85).
K EYBOARD STUCK KEY FAILURE —
For external keyboards or keypads, check the cable connection. Restart
the computer, and avoid touching the keyboard or keys during the boot routine. Run the Stuck Key test
in the Dell Diagnostics (see page 85).
L ICENSED CONTENT IS NOT ACCESSIBLE IN M EDIA D IRECT —
Dell MediaDirect™ cannot verify the Digital
Rights Management (DRM) restrictions on the file, so the file cannot be played. See "Dell
MediaDirect™ problems" on page 98.
M
EMORY ADDRESS LINE FAILURE AT ADDRESS
,
READ VALUE EXPECTING VALUE
—
A memory module may be
faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory"
on page 119).
M EMORY ALLOCATION ERROR —
The software you are attempting to run is conflicting with the operating
system, another program, or a utility. Shut down the computer, wait 30 seconds, and then restart it. Try
to run the program again. If the error message still appears, see the software documentation.
M EMORY DATA LINE FAILURE AT ADDRESS , READ VALUE EXPECTING VALUE —
A memory module may be
faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory"
on page 119).
M EMORY DOUBLE WORD LOGIC FAILURE AT ADDRESS , READ VALUE EXPECTING VALUE —
A memory module
may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see
"Memory" on page 119).
M EMORY ODD / EVEN LOGIC FAILURE AT ADDRESS , READ VALUE EXPECTING VALUE —
A memory module may
be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see
"Memory" on page 119).