Dell XPS 8900 Скачать руководство пользователя страница 84

Страница: 84 / 107

Removing the processor fan

and heat-sink assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before working inside your computer

. After working inside your

computer, follow the instructions in

After working inside your

computer

. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

WARNING: The heat sink may become hot during normal operation.

Allow sufficient time for the heat sink to cool before you touch it.

CAUTION: For maximum cooling of the processor, do not touch the

heat transfer areas on the heat sink. The oils in your skin can reduce

the heat transfer capability of the thermal grease.

Prerequisites

Remove the

computer cover

Procedure

Disconnect the processor-fan cable from the system board.
For more information, see “

System-board components

”.

Loosen the captive screws that secure the processor fan and heat-sink

assembly to the system board.

Содержание XPS 8900












































































































Результаты поиска

Содержание XPS 8900

Отзывы:

Dell XPS 8900, Руководство по обслуживанию, Страница: 84 / 107

Результаты поиска

Содержание XPS 8900

Отзывы: