Dell XPS 700, Руководство пользователя

Страница: 94 / 174

96
Removing and Installing Parts
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug the cable
into the computer.
12
If present, lower the card retention device that lays over the installed cards and snap it into place.
13
Replace the computer cover (see "Replacing the Computer Cover" on page 125), reconnect the
computer and devices to electrical outlets, and then turn them on.
Network Adapter and Sound Card Settings
If you installed a sound card:
1
Enter system setup (see "Entering System Setup" on page 132), select Integrated Audio Controller ,
and then change the setting to Off .
2
Connect external audio devices to the sound card connectors. Do not connect external audio devices
to the microphone, speaker/headphone, or line-in connectors on the back panel.
If you removed a sound card:
1
Enter system setup (see "Entering System Setup" on page 132), select Integrated Audio Controller ,
and then change the setting to On .
2
Connect external audio devices to the audio connectors on the back panel of the computer.
1
graphics card bridge (not
present on some dual
graphics card configurations)
2 power connectors (2) 3 dual-PCI Express graphics
cards
1
3
2
book.book Page 96 Thursday, July 20, 2006 11:10 AM