manualshive.com logo in svg

Dell XPS 700, Руководство пользователя, Страница: 141 / 174

Поделиться
Скачать
Dell XPS 700 Скачать руководство пользователя страница 141

Appendix

143

Dell provides limited technical support for the computer and any "Dell-installed" software and 
peripherals

1

. Support for third-party software and peripherals is provided by the original manufacturer, 

including those purchased and/or installed through Dell Software and Peripherals, Readyware, and 
Custom Factory Integration

2

.

1

 

Repair services are provided pursuant to the terms and conditions of your limited warranty and any optional support ser-
vice contract purchased with the computer.

2

 

All Dell-standard components included in a Custom Factory Integration (CFI) project are covered by the standard Dell lim-
ited warranty for your computer. However, Dell also extends a parts replacement program to cover all nonstandard, third-
party hardware components integrated through CFI for the duration of the computer’s service contract.

Definition of "Dell-Installed" Software and Peripherals

Dell-installed software includes the operating system and some of the software programs that are 
installed on the computer during the manufacturing process (Microsoft

®

 Office, Norton Antivirus, and 

so on).
Dell-installed peripherals include any internal expansion cards, or Dell-branded module bay or PC Card 
accessories. In addition, any Dell-branded monitors, keyboards, mice, speakers, microphones for 
telephonic modems, docking stations/port replicators, networking products, and all associated cabling are 
included.

Definition of "Third-Party" Software and Peripherals

Third-party software and peripherals include any peripheral, accessory, or software program sold by Dell 
not under the Dell brand (printers, scanners, cameras, games, and so on). Support for all third-party 
software and peripherals is provided by the original manufacturer of the product.

FCC Notices (U.S. Only)

Most Dell computer systems are classified by the Federal Communications Commission (FCC) as 
Class B digital devices. To determine which classification applies to your computer system, examine all 
FCC registration labels located on the bottom, side, or back panel of your computer, on card-mounting 
brackets, and on the cards themselves. If any one of the labels carries a Class A rating, your entire system 
is considered to be a Class A digital device. If 

all

 labels carry an FCC Class B rating as distinguished by 

either an FCC ID number or the FCC logo, (

), your system is considered to be a Class B digital 

device.
Once you have determined your system’s FCC classification, read the appropriate FCC notice. Note that 
FCC regulations provide that changes or modifications not expressly approved by Dell could void your 
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired 
operation.

book.book  Page 143  Thursday, July 20, 2006  11:10 AM

Содержание XPS 700















































































































































































Отзывы:

Нет отзывов