manualshive.com logo in svg

Dell XPS 700, Руководство пользователя, Страница: 12 / 174

Поделиться
Скачать
Dell XPS 700 Скачать руководство пользователя страница 12

14

Setting Up and Using Your Computer

1

front I/O connectors

Plug USB and other devices into the 

appropriate connectors (

see "Front I/O 

Connectors" on page 15).

2

3.5-inch drive bays (2)

Can hold an optional Media Card Reader or floppy drive.

3-6

5.25-inch drive bays (4)

Can hold a CD/DVD drive, or a SATA hard drive in a 5.25-inch drive bay carrier.

NOTE: 

The hard-drive carrier is only for use in the 5.25-inch drive bays. The 

floppy-drive/Media Card Reader and hard-drive carriers are not interchangeable.

7

front panel LEDs (4)

Multi-colored lights provide illumination for the front of the computer.

NOTE: 

The color of the front panel LEDs can be adjusted in system setup (see 

"System Setup" on page 132).

8

CD/DVD drive tray eject 
button (4)

Use to eject the drive tray of a CD/DVD drive.

NOTE: 

The CD/DVD drive tray eject button is not a handle. The self-tending doors 

open automatically when the eject button is pressed and the drive tray is ejected.

9

front panel LEDs (4)

Multi-colored lights provide illumination for the front of the computer.

NOTE: 

The color of the front panel LEDs can be adjusted in system setup (see 

"System Setup" on page 132).

10

power button

Press to turn on the computer.

 

NOTICE: 

To avoid losing data, do not use the power button to turn off the 

computer. Instead, perform an operating system shutdown.

NOTE: 

The power button can also be used to wake the system or to place it into a 

power-saving state (see "Power Management" on page 39).

11

power light

The power light illuminates and blinks or remains solid to indicate different states:

• No light — The computer is turned off.
• Steady green — The computer is in a normal operating state.
• Blinking green — The computer is in a power-saving state.
• Steady amber — There may be a problem with an installed device (see "Solving 

Problems" on page 45).

• Blinking amber — An internal power problem may exist (see "Power Problems" 

on page 54).

12

computer stand

Attach the computer stand to provide stability to the system.

 

CAUTION: 

The computer stand should be installed at all times to ensure 

maximum system stability. Failure to install the stand could result in the 
computer tipping over, potentially resulting in bodily injury or damage to the 
computer.

book.book  Page 14  Thursday, July 20, 2006  11:10 AM

Содержание XPS 700















































































































































































Отзывы:

Нет отзывов