Dell XPS 600 Скачать руководство пользователя страница 14

Страница: 14 / 79

System Setup Program: Dell XPS 600 Service Manual

syssetup.htm[4/10/2014 9:50:48 PM]

Back to Contents Page

System Setup Program

Dell™ XPS™ 600 Service Manual

Overview

Entering the System Setup Program

System Setup Program Screens

System Setup Program Options

Boot Sequence

Clearing Forgotten Passwords

Clearing CMOS Settings

Overview

Use the system setup program as follows:

To change the system configuration information after you add, change, or remove any hardware in your computer

To set or change a user-selectable option such as the user password

To read the current amount of memory or set the type of hard drive installed

Before you use the system setup program, it is recommended that you write down the system setup program screen

information for future reference.

NOTICE:

Unless you are an expert computer user, do not change the settings for this program. Certain changes can

make your computer work incorrectly.

Entering the System Setup Program

1. Turn on (or restart) your computer.

2. When the blue DELL™ logo appears, press <F2> immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows®

desktop. Then

shut down your computer

and try again.

System Setup Program Screens

The system setup program screen displays current or changeable configuration information for your computer. Information on

the screen is divided into three areas: the options list, active options field, and key functions.

Options List

— This field appears on the left side of the system setup

program window. The field is a scrollable list containing features that define

the configuration of your computer, including installed hardware, power

conservation, and security features.

Option Field

— This field contains

information about each option. In this field

you can view your current settings and

make changes to your settings.

Use the right- and left-arrow keys to

highlight an option. Press <Enter> to make

that selection active.

Содержание XPS 600
















































































Результаты поиска

Содержание XPS 600

Отзывы:

Похожие инструкции для XPS 600

Бренды по названию

Популярные бренды

Dell XPS 600, Руководство по обслуживанию

Результаты поиска

Содержание XPS 600

Отзывы:

Похожие инструкции для XPS 600

Бренды по названию

Популярные бренды