a.
DHCP Option IDs
— Enter the supported DHCP options. Each value can only be used once and must be between
128
and
254
.
b.
Interpret DHCP Vendor-Specific Info
— Select this check box for automatic interpretation of the vendor information.
c.
DHCP Vendor ID
— Shows the DHCP Vendor ID when the dynamically allocated over DHCP/BOOTP option is selected.
d.
DHCP UserClass ID
— Shows the DHCP UserClass ID when the dynamically allocated over DHCP/BOOTP option is
selected.
3.
Click
OK
to save the settings.
Configuring the ENET Settings
To configure the ENET settings:
1.
From the desktop menu, click
System Setup
, and then click
Network Setup
.
The
Network Setup
dialog box is displayed.
2.
Click the
ENET
tab, and use the following guidelines:
10
