3
drives 6-11 mapped to sled 2
4
drives 12-17 mapped to sled 3
5
drives 18-23 mapped to sled 5
6
right control panel
7
EST tag
8
(optional) NVMe hard drive location
Front view of the control panels
Figure 4. Front view of the left and right control panels
Table 1. Control panel
Item
Indicator or button
Icon
Description
1
left control panel
-
The power-on indicator and system identification LED for sleds 1 and
2 are located on the left control panel.
2
right control panel
-
The power-on indicator and system identification LED for sleds 3 and
4 are located on the right control panel.
3
power-on indicator or system
state indicator or power button
for sleds 1 and 3
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
NOTE:
To gracefully shut down an ACPI-compliant
operating system, press the power button.
4
system identification button for
sleds 1 and 3
Press the system ID button:
•
To locate a particular sled within the enclosure.
•
To turn the system ID on or off.
NOTE:
If the sled stops responding during POST, press and
hold the system ID button (for more than five seconds) to
enter the BIOS progress mode.
5
power-on indicator or system
state indicator or power button
for sleds 2 and 4
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
8
Overview