Back to Contents Page
Replacing the Front I/O Panel
Dell™ Vostro™ A100/A180 Service Manual
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Replacing the Computer Cover
).
3.
Remove the front panel (see
Replacing the Front Panel
).
4.
Lay the computer horizontally on a flat surface.
5.
Disconnect all the cables that are connected to the I/O panel from the system board.
6.
Cut the cable tie securing the cables to the chassis.
7.
Remove the screw that secures the I/O panel to the chassis.
8.
Carefully remove the existing I/O panel from the computer.
9.
To install a new I/O panel, align and slide the I/O panel clamp into the bottom of the I/O panel clamp slot.
10.
Replace the screw that secures the I/O panel to the chassis.
11.
Reconnect the cables to the system board.
12.
Replace the front panel (see
Replacing the Front Panel
).
13.
Replace the computer cover (see
Replacing the Computer Cover
).
14.
Connect your computer and devices to an electrical outlet, and turn them on.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1
cables
2
screw
3
I/O panel
4
I/O panel clamp slot
Содержание Vostro A100
Страница 5: ......
Страница 18: ...Back to Contents Page ...