Dell Vostro 7590 Скачать руководство пользователя страница 73

Страница: 73 / 91

Option

Description

USB Configuration

Allows you to enable or disable the internal/integrated USB

configuration.

The options are:

•

Enable USB Boot Support

•

Enable External USB Port

By default, all the options are enabled.

NOTE:

USB keyboard and mouse always work in the BIOS

setup irrespective of these settings.

Thunderbolt Adapter Configuration

Allows you to configure the Thunderbolt adapter security settings

within the operating system.

The options are:

•

Thunderbolt

—This option is enabled by default.

•

Enable Thunderbolt Support

•

Enable Thunderbolt (and PCIe behind TBT) Pre-boot Modules

•

No Security

•

User Authorization

—This option is enabled by default.

•

Secure Connect

•

Display Port and USB Only

Thunderbolt Auto Switch

Allows you to configure the method used by the Thunderbolt controller
to perform the PCIe device enumeration. By default, the

Auto switch

option is enabled.
The options are:

•

Native Enumeration

•

BIOS Assist Enumeration

Audio

Allows you to enable or disable the integrated audio controller. By

default, the

Enable Audio

option is selected.

The options are:

•

Enable Microphone

•

Enable Internal Speaker

By default, all the options are enabled.

Fingerprint Reader

Enables or disables the fingerprint reader device. The options are:

•

Enable Fingerprint Reader Device

•

Enable Finger Reader Single Sign On

By default, both the options are enabled.

Miscellaneous devices

Allows you to enable or disable the following devices:

•

Enable Camera

•

Enable Hard Drive Free Fall Protection

•

WiFi Radio

•

Enable Secure Digital (SD) Card

By default, all the options are enabled.

System setup

Содержание Vostro 7590




























































































Результаты поиска

Содержание Vostro 7590

Отзывы:

Похожие инструкции для Vostro 7590

Бренды по названию

Популярные бренды

Dell Vostro 7590, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 7590

Отзывы:

Похожие инструкции для Vostro 7590

Бренды по названию

Популярные бренды