Dell Vostro 7590, Руководство по обслуживанию

Страница: 22 / 91

Steps
1 Lift the mylar and align the notch on the memory module with the tab on the memory-module slot.
2 Slide the memory module firmly into the slot at an angle.
3 Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next step
1 Connect the battery cable .
2 Install the base cover .
3 Follow the procedure in After working inside your computer .
Solid-state drive
Removing the M.2 2280 solid-state drive
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Disconnect the battery cable .
About this task
The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
NOTE: The computer is shipped with solid-state drive shield only if the solid-state drive capacity is more than 512 GB.
22 Disassembly and reassembly