Dell Vostro 7590, Руководство по обслуживанию

Страница: 25 / 91

Next step
1 Connect the battery cable .
2 Install the base cover .
3 Follow the procedure in After working inside your computer .
Removing the M.2 2230 solid-state drive
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Disconnect the battery cable .
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure.
Steps
1 Remove the screw (M2x4) that secures the solid-state drive to the palm-rest and keyboard assembly.
2 Slide and remove the solid-state drive module from the solid-state drive slot on the system board.
Installing the M.2 2230 solid-state drive
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure to
accommodate the M.2 2230 solid-state drive.
Disassembly and reassembly 25