Dell Vostro 5890, Руководство по обслуживанию

Страница: 28 / 73

About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the removal
procedure.
Steps
1. Lay the computer on the right side.
2. Disconnect the data and power cables from the hard drive.
3. Remove the cables from the routing guides on the hard-drive assembly.
4. Remove the single (6-32) screw that secures the 3.5-inch hard-drive assembly to the chassis.
5. Lift the hard-drive assembly away from the chassis.
6. Remove the four (6-32) screws that secure the hard drive to the hard-drive cage.
7. Remove the hard drive from the hard-drive cage.
NOTE: To remove 2
nd
3.5-inch hard drive, disconnect and un-route the hard-drive power extension cable, 3.5-inch
SATA cable, 2.5-inch hard drive and ODD SATA cable and CPU power cable from the cable holder clip. Remove the two
(6-32) screws that secure the hard drive assembly to the chassis. Remove the hard drive from the hard-drive cage.
28 Disassembly and reassembly