Dell Vostro 5890 Скачать руководство пользователя страница 54

Страница: 54 / 73

Table 4. System setup options—Boot Configuration menu (continued)

Boot Configuration

By default, the option is not enabled.

Secure Boot Mode

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

By default, the

custom mode

option is not enabled.

Custom Mode Key Management

Select the custom values for expert key management.

Table 5. System setup options—Integrated Devices menu

Integrated Devices

Date/Time

Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.

Audio

Enable Audio

Enable or disable the integrated audio controller.

By default, all the options are enabled.

Serial Port

Serial Port Configuration

Enable or disable the serial port address.

By default, the

COM1: Port is configured at 3F8h with IRQ4

option is

enabled.

USB Configuration

●

Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.

By default, all the options are enabled.

Front USB Configuration

Enable or disable the individual front USB ports.

By default, all the options are enabled.

Rear USB Configuration

Enable or disable the individual rear USB ports.

By default, all the options are enabled.

Miscellaneous Devices

Enable or disable the PCI Slot

By default, the option is enabled.

Dust Filter Maintenance

Enable or disable the dust filter maintenance.

By default, the

Disabled

option is enabled.

Table 6. System setup options—Storage menu

Storage

SATA Operation

Enable or disable the operating mode of the integrated SATA hard drive
controller.

By default, the

AHCI

option is enabled.

Storage Interface

Port Enablement

Enable or disable the onboard drives.

By default, all the options are enabled.

SMART Reporting

System setup

Содержание Vostro 5890










































































Результаты поиска

Содержание Vostro 5890

Отзывы:

Бренды по названию

Популярные бренды

Dell Vostro 5890, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 5890

Отзывы:

Бренды по названию

Популярные бренды