manualshive.com logo in svg

Dell Vostro 5480, Руководство пользователя, Страница: 82 / 106

Поделиться
Скачать
Dell Vostro 5480 Скачать руководство пользователя страница 82

Option

Description

If USB port is disabled, the OS cannot see any device attached to this port.

The options are:

•

Enable USB Boot Support: This option is enabled by default.

•

Enable External USB Port: This option is enabled by default.

•

Enable Thunderbolt Port: This option is enabled by default.

•

Enable Thunderbolt Boot Support. This is an optional feature.

•

Always Allows Dell Docks. This is an optional feature.

•

Enables Thunderbolt (and PCIe behind TBT) Pre-boot

USB PowerShare

This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using 
the stored system battery power through the USB PowerShare port.

Unobtrusive Mode

This option, when enabled, pressing 

Fn+F7

 turns off all light and sound emissions in the system. To resume normal 

operation, press 

Fn+F7

 again. This option is disabled by default.

Miscellaneous 
Devices

Allows you to enable or disable the following devices:

•

Enable Camera: This option is enabled by default.

•

Enable Hard Drive Free Fall Protection: This option is enabled by default.

•

Enable Secure Digital (SD) Card: This option is enabled by default.

•

Secure Digital (SD) Card Boot

•

Secure Digital (SD) Card Read — only Mode

GUID-8532F736-D37C-4D26-B691-BFF3A777C57E

Video screen options

Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power source (On Battery and On AC).

NOTE: 

The video setting will be visible only when a video card is installed into the system.

GUID-802CD4B6-7238-4AE6-BB78-4994DCAE0C3A

Security screen options

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE: 

You must set the admin password before you set the system or hard drive password. Deleting the 

admin password automatically deletes the system password and the hard drive password.

NOTE: 

Successful password changes take effect immediately.

Default setting: Not set

System Password

Allows you to set, change or delete the system password.

NOTE: 

Successful password changes take effect immediately.

Default setting: Not set

82

System setup options

Содержание Vostro 5480











































































































Отзывы:

Нет отзывов