Dell Vostro 2510 Скачать руководство пользователя страница 64

Страница: 64 / 72

Back to Contents Page

USB Daughter Card

Dell™ Vostro™ 2510

Service Manual

Removing the USB Daughter Card

Replacing the USB Daughter Card

Removing the USB Daughter Card

CAUTION:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

1. Follow the instructions in

Before Working on Your Computer

2. Remove the hard drive cover. See

Removing the Hard Drive

for an illustration of the hard drive cover.

3. Remove the WLAN card (see

Removing a WLAN Card

4. Remove the hinge cover (see

Removing the Hinge Cover

5. Remove the keyboard (see

Removing the Keyboard

6. Remove the display assembly (see

Removing the Display Assembly

7. Remove the palm rest (see

Removing the Palm Rest

8. Remove the internal card with Bluetooth wireless technology, if installed (see

Removing the Card

9. Remove the M2.5 x 5-mm screw from the daughter card.

10. Disconnect the daughter-card connector from the daughter card.

11. Remove the daughter card from the computer base.

Содержание Vostro 2510









































































Результаты поиска

Содержание Vostro 2510

Отзывы:

Dell Vostro 2510, Руководство по обслуживанию, Страница: 64 / 72

Результаты поиска

Содержание Vostro 2510

Отзывы: