Dell Vostro 1710 Скачать руководство пользователя страница 58

Страница: 58 / 69

13. Replace any blanks you removed from the ExpressCard slot and the 8-in-1 card slot.

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside

the computer. Failure to do so may result in damage to the computer.

14. Turn on the computer.

NOTE:

If you use a BIOS update program media to flash the BIOS, press <F12> before inserting the media in order to

set the computer to boot from the media for one time only. Otherwise, you must enter the system setup program to

change the default boot order.

15. Flash update the BIOS (see

Flashing the BIOS

for more information).

16. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For

information on the system setup program, see the

Dell™ Technology Guide

on your computer or at s

upport.dell.com

Back to Contents Page

Содержание Vostro 1710






































































Результаты поиска

Содержание Vostro 1710

Отзывы:

Бренды по названию

Популярные бренды

Dell Vostro 1710, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 1710

Отзывы:

Бренды по названию

Популярные бренды