9. Connect the keyboard cable to the system board and close the latch to secure the cable.
10. Connect the keyboard backlit cable to the system board and close the latch to secure the cable.
11. Connect the touchpad cable to the system board and close the latch to secure the cable.
12. Connect the speaker cable to the system board.
13. Connect the I/O-board cable to the system board.
14. Adhere the tape that secures the I/O-board cable to the system board.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Install the
.
5. Install the
or
in M.2 slot one, whichever applicable.
6. Install the
in M.2 slot two, if applicable.
7. Install the
.
8. Install the
.
9. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
or
from M.2 slot one, whichever applicable.
6. Remove the
from M.2 slot two, if applicable.
7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
NOTE:
The system board can be removed along with the heat sink.
13. Remove the
.
14. Remove the
power button with optional fingerprint reader
based on the system configuration.
15. Remove the
power button with fingerprint reader
based on the system configuration.
16. Remove the
.
17. Remove the
.
18. Remove the
.
19. Remove the
.
About this task
After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.
62
Removing and installing components
Содержание Vostro 15 7510
