Dell Vostro 15 7510, Руководство по обслуживанию

Страница: 39 / 85

Steps
1. Align the screw holes on the heat sink and Mylar cover with the screw holes on the system board.
2. In sequential order (as indicated on the Mylar cover), tighten the seven captive screws that secure the heat sink to the
system board.
Next steps
1. Install the base cover .
2. Exit Service Mode .
3. Follow the procedure in After working inside your computer .
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Enter Service Mode .
3. Remove the base cover .
4. Remove the GPU fan .
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
Removing and installing components 39