Dell Vostro 15 7510, Руководство по обслуживанию

Страница: 41 / 85

Steps
1. Slide the I/O board into the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two (M2x4) screws that secure the I/O board to the palm-rest and keyboard assembly.
4. Connect the power button with fingerprint reader cable into the connector on the I/O board and close the latch to secure
the cable.
5. Connect the power button cable to the I/O board.
6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7. Adhere the tape that secures the I/O-board cable to the I/O board.
8. Adhere the adhesive tape that secures the I/O board to the palm-rest and keyboard assembly.
Next steps
1. Install the GPU fan .
2. Install the base cover .
3. Exit Service Mode .
4. Follow the procedure in After working inside your computer .
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Enter Service Mode .
3. Remove the base cover .
4. Remove the battery .
5. Remove the system board .
Removing and installing components 41