a. Disconnect the I/O panel connector cable from the system board [1].
b. Lift and remove the I/O panel from the computer [2].
Installing the I/O panel
1.
Insert the I/O panel into the slot on the computer chassis.
2.
Connect the I/O panel cable to the system board.
3.
Install the:
a.
fan
b.
heat sink
c.
WLAN card
d.
battery
e.
back cover
4.
Follow the procedure in
After working inside your computer
Removing the power connector
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
back cover
b.
battery
c.
heat sink
d.
WLAN card
e.
display assembly
3.
To remove the power connector:
a. Disconnect the power connector cable from the system board [1].
b. Lift the power connector from the computer [2].
19
