Dell Vostro 14-3468, Руководство пользователя

Страница: 65 / 80

Näppäimet Navigointi
Esc Siirtyy edelliselle sivulle, kunnes päänäyttö on näkyvissä. Esc-näppäimen painaminen päänäytöllä näyttää kehotteen
tallentaa muutokset, minkä jälkeen järjestelmä käynnistetään uudelleen.
System setup options
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Table 7. General tab
Option Description
System Information This section lists the primary hardware features of your computer.
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory Technology, DIMM A Size, DIMM B Size,
• Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
Technology.
• Device Information: Displays Primary Hard Drive, ODD Device, LOM MAC Address, Video Controller, Video
BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device, Bluetooth
Device.
Battery Information Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence Boot Sequence Allows you to change the order in which the computer
attempts to find an operating system. The option is:
• Windows Boot Manager
By default, all the options are checked. You can also
deselect any option or change the boot order.
Boot List Option Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot
Options This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
disabled.
Date/Time Allows you to change the date and time.
Table 8. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
• Disabled
• AHCI: This option is enabled by default.
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options
are:
• SATA-0: This option is selected by default.
• SATA-1: This option is selected by default.
Järjestelmän asennusohjelma 65