CAUTION:
Practice caution when handling the LCD HUD by supporting it with one hand, while working on the
hinges.
b) Lift and remove the display assembly [2].
Installing the display assembly
1. Align the display assembly with the chassis.
2. Connect the eDP cable to the connector on the system board and lock the locking tab.
3. Affix the adhesive tape to secure the eDP cable.
4. Route the WLAN and display assembly cables through the cable-securing tabs.
5. Tighten the display hinges three M2.5L8 screws to secure the display assembly.
6. Install the:
a)
b)
c)
d)
e)
7. Follow the procedure in
After working inside your computer
.
Purkaminen ja kokoaminen
39
Содержание Vostro 14-3468
Страница 1: ...Dell Vostro 14 3468 Owner s Manual Regulatory Model P76G Regulatory Type P76G002 ...
Страница 6: ...ePSA diagnostiikan suorittaminen 74 6 Technical specifications 75 7 Dellin yhteystiedot 80 6 Contents ...
Страница 63: ...Taulukko 6 Realtek HD ääniohjaimet Ennen asennusta Asennuksen jälkeen Tekniikka ja komponentit 63 ...
Страница 79: ...Feature Specification Airborne contaminant level G1 as defined by ISA S71 04 1985 Technical specifications 79 ...