manualshive.com logo in svg

Dell Vostro 1200, Руководство по обслуживанию, Страница: 6 / 41

Поделиться
Скачать
Dell Vostro 1200 Скачать руководство пользователя страница 6

Back to Contents Page

  

 

 Internal Card With Bluetooth

® 

Wireless Technology  

Dell™ Vostro™ 1200 Service Manual 

 

  

Removing the Card 

 

  

Replacing the Card 

 

 

 

Removing the Card  

 

 

If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed. 

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Remove the screw on the card cover, and remove the cover.  
 

 

  

4.

Remove the card out of the compartment.  
 

 

  

5.

Disconnect the cable from the card connector.  
 

  

 

Replacing the Card  

 

 

 

 

1.

Connect the cable to the card connector.  
 

 

  

2.

Place the card into the compartment.  
 

 

CAUTION: 

Before performing the following procedures, read the safety instructions in your 

Product Information Guide

.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of 

the computer.

1  card 

2  connector 

3  compartment  4  cover 

5  screw 

 

 

 

 

 

NOTICE: 

Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.

 

CAUTION: 

Before performing the following procedures, read the safety instructions in your 

Product Information Guide

.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching a connector on the back panel of the 

computer.

Содержание Vostro 1200










































Отзывы:

Нет отзывов