Back to Contents Page
I/O Board
Dell™ Vostro™ 1088 Service Manual
Removing the I/O Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
hard drive
from the computer.
5.
Remove the
WLAN card
from the computer.
6.
Remove the
control panel cover
from the computer.
7.
Remove the
keyboard
from the computer.
8.
Remove the
display assembly
from the computer.
9.
Remove the
palm rest
from the computer.
10.
Remove the two screws that connect the I/O board to the computer chassis.
11.
Disconnect the modem cable from the connector on the I/O board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
