manualshive.com logo in svg

Dell UltraSharp UP3218K, Руководство пользователя, Страница: 41 / 50

Поделиться
Скачать
Dell UltraSharp UP3218K Скачать руководство пользователя страница 41

 

Operating the Monitor

       |

    

41

When the monitor enters the

 Power Save

 mode, the following message appears:

Dell UltraSharp 32 Monitor

Entering Power Save Mode. 

UP3218K

Activate the computer and wake up the monitor to gain access to the 

OSD

.

If you press any button other than the power button, the following messages will appear 
depending on the selected input:

Dell UltraSharp 32 Monitor

Press any key on the keyboard or move the mouse or wake it up.

If there is no display, press the monitor button again to select the correct

input source.

No DP 1 signal from your device.

UP3218K

If either DP 1, DP 2 input is selected and the corresponding cable is not connected, a 
floating dialog box as shown below appears.

 

Dell UltraSharp 32 Monitor

The display will go into Power Save Mode in 4 minutes.

No DP 1 Cable

www.dell.com/support/monitors

UP3218K

                             

                                                                      

or

 

Dell UltraSharp 32 Monitor

The display will go into Power Save Mode in 4 minutes.

No DP 2 Cable

www.dell.com/support/monitors

UP3218K

                             

                                                                      
See 

Troubleshooting

 for more information.

Содержание UltraSharp UP3218K



















































Отзывы:

Нет отзывов