manualshive.com logo in svg

Dell UltraSharp UP3218K, Руководство пользователя, Страница: 21 / 50

Поделиться
Скачать
Dell UltraSharp UP3218K Скачать руководство пользователя страница 21

 

Setting Up the Monitor

       |

    

21

Connecting the DP cables

1. Connection Guide for 8K4K 60Hz (max.) Resolution with AMD or 

nVidia Graphics Cards (Two DP Cables)

1. Follow the connection guide below for 

DP cables connection.

2. Turn On the monitor by pressing the 

power on/off button.

3. Power up/ Boot up the computer system.
4. D u r i n g   B I O S / P o s t   m o d e ,   y o u   m a y 

observed a stretch screen content.

5. Change resolution if necessary up to 7680 

x 4320 60Hz.

•

Recommended list of cards: 

nVidia GeForce series : GTX1070/1080, 
Quadro series : P5000/6000.
AMD Radeon series : RX480.  
Ensure the graphics card has 2 or more DP outputs.

•

Graphics card requirement: 

With two DP ports that are compliant to DP1.4 support 
HBR3, DisplayID 1.3 supporting Tile Display feature. 

•

AMD driver version:

revision later than 17.10 or later
http://support.amd.com/en-us/download

•

nVidia driver version:

revision later than 381.xx or later

http://www.nvidia.com/Download/index.aspx?lang=en-us

Troubleshooting

•

To speed up monitor
initialization, disable monitor
Sleep by OSD (Menu>Energy
Settings>Monitor Sleep> Disable).

2. 8K4K resolution changed after

recovery from PC standby/
Hibernate/ Reboot :

•

In certain cases, graphics card
may not detect the monitor
properly when the monitor goes
to sleep.

•

Disable monitor Sleep by OSD
(Menu > Energy Settings >
Monitor Sleep > Disable).

•

Reboot PC.

1. BIOS/Post screen is not observed, 

black screen during BIOS/Post, 
long period of black screen when 
monitor wake from sleep:

3. Cannot achieve or image unstable 

at 8k4k resolution:

•

Ensure your graphics card is 
capable to support 8k4k.

•

Un-install the old graphics driver
(Device Manager -> Display Adaptor 
-> uninstall) before installing the 
new driver.

•

Use only the in-box DP cables for 
connection to your PC.  
Non-DP certified or low quality 
DP cable may degrade signal 
integrity/bandwidth, resulting in 
reduced performance.

•

Connect only DP1 on the monitor to 
any DP port of the graphics card.  
Power up the monitor and PC 
system. After getting a stable 
image(eg 8k4k resolution), 
connect DP2 of monitor to another 
DP port of the same graphics card.

A

B

DP – DP cable

Connect DP1 port on 
monitor to any of DP port 
on graphics card

DP – DP cable 

Connect DP2 port on 
monitor to any of DP port 
on the same graphics card

DP1

DP2

Graphics card with DP ports

B

A

Содержание UltraSharp UP3218K



















































Отзывы:

Нет отзывов