5. Disassembly and Assembly Procedures
Take 1pcs LED board and 1pcs middle frame, and
then locate the LED board into the specific position of
the middle frame Paste 1pcs mylar tape to fix the
.
LED board with middle frame, then thread the cable
through the hole of the middle frame.
Use a Philips-head screwdriver to tighten 4pcs
screws for locking the bracket with the panel, then
connect the panel lamp cable to the connectors of
the board and fix the LVDS connector, T-con
connector and bracket with 3pcs aluminum foil.
(No.1~4 Screw size= M6x12, Torque=9
±
0.5
kgfxcm)
2
3
4
1
Take 1pcs T-Con cover to assemble with T-Con
board, then use
a Philips-head screwdriver to tighten
2pcs screws for locking the cover with T-Con board.
Paste 4pc black rubbers on the T-Con cover and
panel as the picture below shown.
(No.1~2 Screw size= M3x0.5x4, Torque=3
~5
kgfxcm)
S8
Move the bracket chassis module close to the panel
module, then connect the LVDS cable to the
connector of the T-Con board, then put the bracket
on the back of the panel module.
S9
S10
S11
S12
S7
Assemble the middle frame with the panel unit, then
tear off 3pcs adhesive tape papers on the back of
cable and fix the LED cable on the middle frame as
the picture below shown.
1
2
Use a Philips-head screwdriver to tighten 28pcs
screws for locking the middle frame with the panel.
Paste 1pcs aluminum foil to fix the bracket chassis.
(No.1~28 Screw size= M3x0.5x4, Torque=5
±0.5
kgfxcm)
1
2
7
8
9
13
14
15
3
4
5
6
10
11
12
21
20
19
18
17
16
22
23
24
25
26
28
27
Take a pair of speakers, locate the left speakers to
the probers of the middle frame, then locate the
speakers’ cable to the hooks of the middle frame.
S13
