Specific
Symptoms
What You
Experience
Possible Solutions
Screen image is
too small
Image is
centered on
screen, but does
not fill entire
viewing area
•
Check the
Aspect Ratio
setting in the
Display
menu OSD.
•
Reset the monitor to factory settings.
Cannot adjust
the monitor
with the
buttons on the
front panel
OSD does not
appear on the
screen
•
Turn Off the monitor, unplug the power cord, plug it back,
and then turn On the monitor.
No Input Signal
when user
controls are
pressed
No picture, the
LED light is white
•
Check the signal source. Ensure the computer is not in the
power saving mode by moving the mouse or pressing any
key on the keyboard.
•
Check whether the signal cable is plugged in properly. Re-
plug the signal cable if necessary.
•
Reset the computer or video player.
The picture
does not fill the
entire screen
The picture
cannot fill the
height or width
of the screen
•
Due to different video formats (aspect ratio) of DVDs, the
monitor may display in full screen.
•
Run the built-in diagnostics.
Troubleshooting |
55
Product Specific Problems
