Dell TrueMobile 1300, Руководство пользователя

Страница: 61 / 142

Solving Problems
61
D
ECREASING AVAILABLE MEMORY
—
One or more memory modules may be faulty or improperly seated.
Reinstall the memory modules and, if necessary, replace them. See “ Memory .”
D ISK C : FAILED INITIALIZATION —
The hard drive failed initialization. Run the hard drive tests in the Dell
Diagnostics. See “ Dell Diagnostics .”
D
RIVE NOT READY
—
The operation requires a hard drive in the bay before it can continue. Install a hard
drive in the hard drive bay. See “ Hard Drive .”
E
RROR READING
P C M C I A
CARD
—
The computer cannot identify the ExpressCard. Reinsert the card or
try another card. See “ Using ExpressCards .”
E XTENDED MEMORY SIZE HAS CHANGED —
The amount of memory recorded in NVRAM does not match
the memory installed in the computer. Restart the computer. If the error appears again, contact Dell. See
“
Contacting Dell .”
T
HE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION DRIVE
—
The file that you are trying to copy is
too large to fit on the disk, or the disk is too full. Try copying the file to a different disk or use a larger
capacity disk.
A
FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING CHARACTERS
: \ / : * ? “ < > | —
Do not use these
characters in filenames.
G
ATE
A 2 0
FAILURE
—
A memory module may be loose. Reinstall the memory modules and, if necessary,
replace them. See “ Memory .”
G ENERAL FAILURE —
The operating system is unable to carry out the command. The message is usually
followed by specific information—for example,
Printer out of paper
. Take the appropriate
action.
H
ARD
-
DISK DRIVE CONFIGURATION ERROR
—
The computer cannot identify the drive type. Shut down the
computer, remove the hard drive (see “ Hard Drive ”), and boot the computer from a CD. Then shut down
the computer, reinstall the hard drive, and restart the computer. Run the Hard-Disk Drive tests in the
Dell Diagnostics. See “
Dell Diagnostics .”
H
ARD
-
DISK DRIVE CONTROLLER FAILURE
0 —
The hard drive does not respond to commands from the
computer. Shut down the computer, remove the hard drive (see “ Hard Drive .”), and boot the computer
from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. If the
problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics. See “
Dell
Diagnostics .”
H ARD - DISK DRIVE FAILURE —
The hard drive does not respond to commands from the computer. Shut
down the computer, remove the hard drive (see “ Hard Drive .”), and boot the computer from a CD. Then
shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try
another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics. See “
Dell Diagnostics .”
H
ARD
-
DISK DRIVE READ FAILURE
—
The hard drive may be defective. Shut down the computer, remove
the hard drive (see “ Hard Drive ”), and boot the computer from a CD. Then shut down the computer,
reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the
Hard-Disk Drive tests in the Dell Diagnostics. See “
Dell Diagnostics .”
I
NSERT BOOTABLE MEDIA
—
The operating system is trying to boot to a nonbootable CD. Insert a
bootable CD.
book.book Page 61 Thursday, September 22, 2005 8:08 AM