Replacing the display assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
1
Slide the palm-rest assembly under the display hinges and align the screw holes on the palm-rest assembly with the screw holes on
the display hinges.
2
Replace the six screws (M2.5x3.5) that secure the palm-rest assembly to the display hinges.
3
Close the palm-rest assembly.
4
Connect the display cable to the system board.
5
Align the screw holes on the display-cable bracket with the screw holes on the system board.
6
Replace the two screws (M1.6x2.5) that secure the display-cable bracket to the system board.
7
Adhere the display cable tape to the system board.
8
Connect the touch-screen cable and camera cable to the system board.
Post-requisites
1
Reconnect the
2
Replace the
.
3
Replace the
.
18
Replacing the display assembly
29