Removing the display assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Prerequisites
1
Remove the
2
Remove the
3
Disconnect the
Procedure
1
Peel off the tape that secures the display cable to the hard-disk plate.
2
Remove the two screws (M1.6x2.5) securing the display cable bracket to the system board
3
Lift the display cable bracket off the display cable.
4
Using the pull tab, disconnect the display cable from the system board.
5
Disconnect the touch-screen cable from the system board.
6
Disconnect the camera cable from the system board.
17
Removing the display assembly
27
