4.
Align the screw holes on the display panel with the holes on the display cover.
5.
Replace the eight screws that secure the display panel to the display cover.
6.
Route the antenna cables, power button cable, and display cable through the hinge latches.
7.
Replace the display bezel (see
Replacing the Display Bezel
).
8.
Replace the display assembly (see
Replacing the Display Assembly
).
Display Panel Cable
Removing the Display Panel Cable
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly (see
Removing the Display Assembly
).
3.
Remove the display bezel (see
Removing the Display Bezel
).
4.
Remove the display panel (see
Removing the Display Panel
).
5.
Turn the display panel over and place it on a clean surface.
6.
Lift the tape that secures the display cable to the display board connector and disconnect the display cable.
Replacing the Display Panel Cable
1.
Follow the procedures in
Before You Begin
.
2.
Connect the display cable to the display board connector and secure it with the tape.
3.
Replace the display panel (see
Replacing the Display Panel
).
4.
Replace the display bezel (see
Replacing the Display Bezel
).
5.
Replace the display assembly (see
Replacing the Display Assembly
).
Back to Contents Page
1
display board connector
2
tape
3
display cable
4
back of the display panel
Содержание Studio 1745
Страница 5: ...Back to Contents Page ...
Страница 9: ...Back to Contents Page ...
Страница 47: ...15 Reinstall any removed cards in the ExpressCard slot or the 8 in 1 media card reader Back to Contents Page ...
Страница 59: ......